GIOVE car lift system

The car lift system (standard) allows a difference in height between two finished floors to be overcome at about 6 m.

The car lift system, given the maximum height difference it can overcome, can also be arranged for intermediate floor stops.

The electro-hydraulic elevation system consists of a double pantograph and hydraulic cylinders for platform ascent and descent movement. The car lift can be equipped with pit closure hat (Jupiter CT), in case the car lift is installed outdoors. In this case, the upper floor can be covered with flooring of the customer’s choice (flooring weight 50 to 80 kg/sqm and total thickness of 5 cm.).

Also in the case of car lift systems installed outdoors and with a pit closure platform, a perimeter water collection channel (galvanized steel profile with width 8 cm. and height to be defined according to the thickness of the pavement) is to be placed on the upper edge of the hole.

The passenger car lift system can be supplied in the “MAN ON BOARD” version with CE certification issued by Primary Certifying Body.

SAFETY DEVICES

Electrohydraulic safety (solenoid directional valve) engaged during descent and ascent; locking safeties applied on cylinders. Control device applied externally to the range of the car lift. Operation of the passenger car lift system is done exclusively by operating the button after inserting the key (“Man Present” handling). The switchboard can be arranged for the connection of electric floor locks and/or safeties in order to make the movement of the car elevator system more protected.

ELECTRICAL COMPONENTS

Electrical installations made according to current regulations. Control panel, arranged for “Man Present” movement, activated by low voltage (24 volts), controlled by key switch with red light and emergency stop. General management framework of electrical components. Electric motor, applied on hydraulic unit, powered by three-phase current 380 volts. Electric limit switches. All electrical equipment is IP 55 protected.

TECHNICAL CHARACTERISTICS GIOVE CAR LIFT SYSTEM
Upper compartment dimensions:540 x 260 cm.
Lift platform dimensions:530 x 250 cm.
Technical pit depth:132 cm.
Useful stroke (between finite planes):600 cm.
Useful scope parking space:3,000 kg.
Load-bearing structures and sheet metal:Made of epoxy powder coated steel
Average speed:4 cm/sec.
Motor:Kw. 7,5
Electric current:Three-phase Volts 380
Hydraulic power unit:40×60 H 100 cm.(inserted into adjacent compartment)
Electrical panel: 20×40 H 50 cm.
(arranged for safeties and latches)
Floor pushers: 10×10 H 20 cm.
(with removable key and emergency button)
Security:Emergency STOP button
Plant handling:With removable key and “man-present and responsible handling”
End of plan run:Electric adjustable floor level
Plant in motion:Flashing floor warning light
OPTIONS SUPPLY GIOVE CAR LIFT SYSTEM
Platform size:Customizable according to different needs.
Scope on lower platform3,000 kg (customizations possible upon request)
Pit closure cap:Possibility of flooring (40 to 80 kg/sq. m.)
Perimeter gutter collection
water:
Galvanized steel profiles with height appropriate to the thickness of the pavement
Plant protectionHot dip galvanizing
Closures and safeguards:Automatic floor gates
REI Doors
Infrared anti – intrusion barriers
Car centering photocells on the flatbed
Synoptic outline outline car
Anti-shear perimeter hose
Push-button panel with flashing light:Additional for each loading/unloading floor
Uninterruptible power supply:On demand in case of power failure

DOCUMENTATION ATTACHED TO THE SUPPLY OF THE GIOVE CAR LIFT SYSTEM

  • CE Certificate of Conformity;
  • Functional testing of the equipment;
  • Operation and Maintenance Manual;
  • Plant insertion design with details to the technology network;
  • Plumbing certificate-wiring diagram.

Are you interested in our CAR LIFTING SYSTEMS solutions?