MARTE Car Lift

Marte car hoist is composed of pantograph and hydraulic cylinders for up and down movement of the car platform.

The car lift (Marte CT) can be equipped with a pit closure hat in case the car lift is installed outdoors. In this case, the upper floor can be covered with a pavement of the customer’s choice (at the customer’s expense) to make the existing outdoor pavement uniform.

Also in the case of car lift systems installed outdoors and with a pit closure platform, a perimeter water collection channel (galvanized steel profile with a width of about 8 cm. and height to be defined according to the thickness of the pavement) is to be placed on the upper edge of the hole.

The car elevator can be supplied in the “MAN ON BOARD” version with CE certification issued by Primary Certifying Body.

MARTE CAR MOUNT SAFETY DEVICES

Electrohydraulic safety (overcenter valve) engaged during descent and ascent; locking safeties applied on cylinders.

Control device applied externally to the range of the car lift. The operation of mechanized parking is done exclusively by operating the button after inserting the key (“man-present and responsible” handling).

The switchboard can be arranged for the connection of electric floor locks and/or safeties in order to make the movement of the car elevation system more protected.

ELECTRICAL COMPONENTS

Electrical installations made according to IEC 64-2 standard. Control panel, arranged for “Man Present” movement, activated by low voltage (24 volts), controlled by key switch with red light and emergency stop. General management framework of electrical components. Electric motor, applied on hydraulic unit, powered by three-phase current 380 volts. Electric limit switches. All electrical equipment is IP 55 protected.

MARTE CAR LIFT TECHNICAL FEATURES
Compartment size:540 x 260 cm.
Platform size:530 x 250 cm.
Technical pit depth:
55 cm.
Useful stroke (between finite planes):300 cm.
Useful scope parking space:2500 kg.
Load-bearing structures and sheet metal:Made of painted steel.
Average speed:4 cm/sec.
Motor:Kw. 4 / Hp 5.5
Electric current:three-phase Volt 380 – single-phase Volt 220
Hydraulic power unit:40×60 H 100 cm. (inserted into adjacent compartment)
Electrical panel: 20×40 H 50 cm.
(arranged for safeties and latches)
Floor pushers: 10×10 H 20 cm.
(with removable key and emergency button)
Security:Emergency STOP button
Plant handling:With removable key and “man-present and responsible handling”
End of plan run:Electric adjustable floor level
Plant in motion:Flashing floor warning light
Overall mass:3,500 kg. (with pit closure cap)
Full warranty:2 years
MARTE CAR MOUNT SUPPLY OPTIONS
Platform size:Customizable according to different needs.
Pit closure cap:Possibility of flooring (40 to 80 kg/sq. m.)
Perimeter gutter collection
water:
Galvanized steel profiles with height appropriate to the thickness of the pavement
Plant protection:Hot dip galvanizing
Closures and safeguards:Automatic floor gates
REI Doors
Infrared anti – intrusion barriers
Car centering photocells on the flatbed
Synoptic outline outline car
Anti-shear perimeter hose
Push-button panel with flashing light:Additional for each loading/unloading floor
Uninterruptible power supply:On demand in case of power failure

DOCUMENTATION ATTACHED TO THE SUPPLY OF THE MARTE CAR LIFT

  • CE Certificate of Conformity;
  • Functional testing of the equipment;
  • Operation and Maintenance Manual;
  • Plant insertion design with details to the technology network;
  • Electrical and hydraulic diagram;

Are you interested in our CAR MOUNT solutions?